Coping with a Sudden Hot Water System Breakdown: Actions to Take
Coping with a Sudden Hot Water System Breakdown: Actions to Take
Blog Article
In this article below you'll find a bunch of quality resources pertaining to What Would Cause My Electric Water Heater to Stop Working?.
Many modern-day homes utilize an electrical water heater for their heater, as a result of its benefit and also ease of use. However, similar to any other electrical home appliances, issues might occur with its use, all of a sudden. It can be truly aggravating to wake up to a cool shower as opposed to a warm one or having your bath with water that isn't warm sufficient or perhaps as well warm. Whatever the instance may be, hot water heater issues can be quite stressful. The good news is, we have actually made a listing of feasible remedies to your water heater concerns. There are a variety of factors that could create a lot of these troubles, maybe a problem with the power supply, the electric heating element, or the thermostat. Prior to doing anything, guarantee you shut off the major power supply for safety. Whatever the problem is, getting it repaired ought to not position excessive of a concern if you adhere to these actions:
Call A Specialist:
If after replacing all damaged components as well as resetting your temperature, the hot water heater still isn't functioning, you may require to get in touch with a professional plumber for an expert viewpoint. The problem with your heating unit could be that the hot and cold taps have actually been switched over or it may be undersized for the quantity of warm water required in your house. Whatever the case may be, an expert plumber would certainly aid fix the issue.
Check Your Power Supply:
As standard as this may seem, it is really needed. Without sufficient power, your water heater will certainly not function. So the first thing to do when your water suddenly stops working is to validate that it isn't a power problem. Examine if the fuse is blown out or the breaker tripped. If the circuit breaker is the issue, just transform it on and off again. Replace any type of busted or worn-out fuse. Evaluate the device with power after these modifications to see if it's currently functioning.
Examine Your Thermostat:
If your water heater still isn't working or the water coming out isn't hot enough, you may require to inspect the temperature level setups on your top thermostat. Ensure the circuit breaker is turned off prior to doing anything. Open up the accessibility panel and also press the red button for temperature reset above the thermostat. This ought to help warm the water. Transform the circuit breaker back on and check if the trouble has been solved.
Inspect the Heating Element in the Hot Water Heater:
If it's not a power trouble, then try having a look at your burner if it is still functioning. Evaluate each of your burner to make sure the problem isn't with any one of them. If any of them is faulty, change that part and after that check whether the warm water is back on.
Conclusion
Water heater troubles are not constantly significant. Most of them result from small issues like a blown fuse or damaged burner. Replacing the damaged parts ought to suffice. However, if you are still unable to solve the issue, give a call to your nearby plumber to find to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you enjoyed our excerpt on No Hot Water — Water Heater Repair. Thanks so much for taking time to read our content. Those who appreciated our article kindly make sure you remember to pass it around. Thanks a lot for your time. Visit us again soon.
Leak-free future? Call. Report this page